Scholarly Commons @ MU
Browsing College of Liberal Arts and Applied Science by Author "Electro-Mechanical Engineering Technology (EMET)"
Now showing items 1-13 of 13
-
Adapting a Parker proportional valve for use with a Festo hydraulic trainer
Fields, Audrey; Poeppelman, David; Clements, James; House, LukeStudent engineers designed, built, and tested the adaptation of a Parker Proportional Valve with Festo Hydraulic Trainers for educational use at Edison State Community College. The system will accompany lectures given by ... -
Automated Wire Stripper
Inkrott, Joshua; Bischoff, Andrew; Heuerman, WesFor our groups ENT 498 Senior Design Project we decided to design and build an automated wire cutter and stripping machine. Our final machine can automatically feed, cut and strip wires to a given length and quantity. ... -
Child Safety Seat Occupant Detection and Alert System
Candray, Oscar; Tully, Thomas; Whitt, JohnThis report covers the design, build, and testing if an IoT (Internet of Things) device which uses signal attenuation as a detection condition. The device's intended purpose is to detect when a child has been left in a car ... -
CNC Router
Schiele, James; Stoner, Christina; Williams, EricThis project is an improvement upon the 2018-2019 senior design team’s CNC Router Table project. The project utilizes mechanical, electrical and software components to establish communication between the router table and ... -
Guided Object Fetching Robot
Westbay, Eli; Storey, Isaiah; Francis, NkrumahThis is a reflection on what the GOFR group has accomplished in the pursuit of making an Autonomously Guided Vehicle (AGV). This document will lay out the steps and research performed in order to design and build a functional ... -
High Temperature Limit Sensor for Compressor Connecting Rod
Fischer, Joey; Newman, JonStudent Engineers researched and designed a method to measure temperature on the bearing of an Ariel Corporation compressor connecting rod. Placing a high temperature shut off device in the connecting rod will allow for ... -
Pipe Bend Tester
Proffitt, Morgan; Gilbert, GeorgeThe purpose of this project is to improve an existing pipe bending testing procedure for HDPE 3”-6” diameter pipe. Instead of a manual, unstandardized process, there will be an automated, standardized one more efficient ... -
Remote CO₂ Laser Engraver/Cutter
Dick, Jason; Abernathy, Jonathan; Lewis, NicholasThe goal of our project was to develop and manufacture a CO2 laser engraver capable of being remotely controlled via the internet using a custom-built interface. The purpose of our project was to provide access to individuals ... -
Remote Machine Monitoring
Lydy, Joshua; Arron, BenClippard, A well-known company in Cincinnati Ohio that manufactures pneumatic valves, cylinders, and fittings, provided us with a challenge to build a system for them. This system will monitor 16 CNC machines during the ... -
Senior Design 498 - Universal Test Stand
Gregory, Tyler; Kincaid, KeithFinal report for Senior Design - ENT 498 - Universal Test Stand -
Senior Project X-Ray Plate Holder (The Wilds) Final Report
Williams, Austin; Moss, Kyle; Campbell, Landon; Duty, RyanOur group is creating a robotic x-ray plate holder for The Wilds so that they can x-ray the legs of giraffes while they are standing and non-sedated. The Wilds reached out to Zane State College for this project due to ... -
Septic Tank Monitoring Device
Guffey, Christian; Meermans, Brian; Calhoun, CameronStudent Engineers have modified and updated a current septic tank control panel. This panel has more up-to-date components that gives homeowners and service providers more control over septic systems. The panel will operate ... -
Universal Robot Gripper
Amelung, James; Dyer, Catherine; Klass, Chandler; Speckert, RobThis project will consist of multiple goals and milestones to achieve the desired result of assessing the feasibility of a more universal type of gripper used for material handling in the Rimrock Corporation.